Pourable flexible resin for coatings: impact and abrasion resistance.
WEICON Urethanes are two-components that polymerise at room temperature to form a hard rubber-like material that remains flexible even down to -60°C.
WEICON Urethanes adhere to a variety of materials such as metals, cement, rubber, wood, fibreglass and many others.
They are also recommended as flexible coatings on Weicon Plastic Metals.
Due to their low sensitivity to moisture, they can also be used as a coating in thin thicknesses and have a very high tensile and tear strength.
Repairing a clamping plate
To build:
♦ Vibration dampers
♦ Assembly guides
♦ Flexible seals
♦ Elastic prototypes
♦ Foundry patterns and moulds
For repairs on:
♦ Conveyor belts
♦ Solid rubber tyres
♦ Conveyor rollers
For coating:
♦ Cylinders
♦ Centrifuges
♦ Cleaning drumsEquipment for measuring pressure in repaired radiators
♦ Tanks
♦ Falls and funnels
♦ Pumps
♦ Containers
♦ Dry and wet mixers
♦ Cyclones
♦ Containers
♦ Loading areas
Furthermore, WEICON Urethanes are excellent for vibration protection of machines and their isolation.
>> Urethane catalogue
Weicon Urethane: Surface Pretreatment
Brush for cleaning tanks, bulkheads, etc. The surface must be clean, dry and degreased. Almost all surface contaminants such as oil, grease, dust and dirt can be removed with WEICON Surface Cleaner or WEICON Adhesive and Sealant Cleaner (old paint residues). If surfaces are very dirty or smooth, adhesion can be optimised by sandblasting or mechanical roughening.
The use of a primer can improve adhesion on some surfaces.
Weicon Urethane: Primer M 100
For non-absorbent materials such as aluminium, steel, stainless steel, brass, zinc, tinplate, plastics such as PA 6.6, GRP, PUR, lacquered and enamelled surfaces, ceramics and coated glass.
Base: Solvent - contains synthetic resin.
Colour: Transparent.
Density: 0.8 g/cm³.
Consumption: approx. 20-40ml per m².
>> Technical Data Primer M 100
Weicon Urethane: Primer S 300
For porous and absorbent materials such as wood, concrete, stone, etc.
Base: Solvent - contains polyurethane.
Colour: Transparent
Density: 1.03 gr/cm³
Consumption: approx. 200ml per m²
>> Technical Data Primer S 300
Weicon Urethane: Packaging:
WEICON Urethane 45 (Shore hardness 45) - 500gr. cod. 10514005
WEICON Urethane 60 (Shore hardness 60) - 500gr. cod. 10516005
WEICON Urethane 80 (Shore hardness 80) - 500gr. cod. 10518005
WEICON Primer M 100 - 250ml cod. 13550125
WEICON Primer S 300 - 250ml cod. 13550325
Important note:
The indications and recommendations given here should not be regarded as guaranteed product characteristics. They are based on laboratory tests and practical experience. As individual applications are beyond our knowledge, control and responsibility, this information is provided without obligation. We guarantee the continued excellent quality of our products being free of defects in accordance with and subject to our General Terms and Conditions. However, we recommend appropriate laboratory and practical tests to determine whether the product meets the required characteristics. A claim cannot arise from these tests. The user bears responsibility for inappropriate or unspecified applications.